Publicité
Recommended engine oil:
YAMALUBE SAE 10W-30 Performance All Pur-
pose, SAE 10W-30 or 10W-40
YAMALUBE SAE 5W-30 Performance All Pur-
pose
Recommended engine oil grade:
API Service SE type or higher
Engine oil quantity:
2.0 L (2.11 US qt, 1.76 Imp qt)
10.
Start the engine and let it idle for several minutes
while checking for oil leaks.
NOTICE
If oil is leaking, immediately turn the engine off and
consult a Yamaha dealer.
11.
Turn the engine off and wipe the engine oil dipstick
clean, insert it back into the oil filler hole (without
screwing it in), and then remove it again to check
the oil level.
1. Minimum level mark
2. Maximum level mark
3. Engine oil dipstick
4. Oil filler cap
TIP
The engine oil should be between the minimum and
maximum level marks.
12.
If the engine oil is below the minimum level mark,
add sufficient oil of the recommended type to raise
it to the correct level.
13.
Install and tighten the oil filler cap.
Periodic maintenance
18
Publicité
