Publicité
1.8
Connection to a PC
The NE 500 receiver is fitted with a network interface connector (9) with an IN and Out
socket. In order to operate several receivers with a PC they have to be connected as described
below.
•
Connect the OUT-socket of the first receiver (RX 1) with the IN-socket of the second receiver
(RX 2), connect the OUT-socket of the second receiver (RX 2) with the IN-socket of the third
receiver (RX 3) and so on.
•
Connect the IN-socket of the first receiver (RX 1) to the converter.
•
Connect the converter with to the RS 232 or USB interface of the PC.
•
64 channels can be operated simultaneously at maximum.
•
The distance between PC and receiver should not be too long, because to ensure high-
speed transmission the network cable should not be longer than 100 metres.
or USB PORT
RJ 11
39
Publicité
