Publicité
1.4.9 Lock Function
The receiving module have a lock function to avoid the setting of the receiver
configuration to be changed inadvertently via the buttons.
How to activate the "Lock" Function
•
Press the "Menu" button for about 5 seconds until "LOCK" is displayed.
•
Now all buttons, excpet the ACT-button are locked.
•
The "Lock" function is still activated when the receiver is switched off and on again.
How to deactivate the "Lock" Function
•
Press the "Menu" button for about 5 seconds until "UNLOCK" is displayed.
1.5 Frequency Transmission to Transmitter (ACT Function)
•
The frequency of the receiver can be transmitted to the transmitter.
•
Press the "ACT" button to activate the ACT function.
•
Hold the switched on transmitter with the infra red receiver about 20 to 30 cm in front of
the transmitting infrared diode of the receiver between the "ACT" and "Menu" button.
The beltpack transmitter has the infra red receiver below the LC-Display and the handheld
transmitter has the infra red receiver at its bottom.
•
As soon as the transmitter has the same frequency as the receiving module ("Group" and
"Channel" are displayed), the transmission is finished.
Important:
The frequency can be transmitted to one transmitter only.
35
Publicité
