Publicité
1.
Remove the sack. The bag must be sealed after it is removed from the machine. Use only Dustcontrol's
original bags, see Accessories for more information.
2.
Install the new bag. Use the tension band for dust-free work. Use the hooks for easy hanging of the bag.
3.
Clean the filter and use the dust collector.
L - Longopac®
Dust-free replacement of Longopac®
NOTE
The machine must be switched on during the entire bag change.
1.
The bag cassette is closed at one end with a cable tie. When the bag starts to fill or you want to change the
bag, just pull it down and new material will come out of the cassette and the bag will be longer.
2.
To make a new sack, the sack material is pulled down and sealed at the top with cable ties.
3.
Another cable tie is placed above the first and between them the bag material is cut off.
DC Tromb Turbo
MIN 5cm
35
Publicité
