voestalpine Bohler Welding URANOS NX 2200 SMC Classic Mode D'emploi page 20

SYSTEM PRESENTATION
3.4 Front control panel URANOS NX 2200 SMC Classic
EN
1
VRD (Voltage Reduction Device)
Voltage Reduction Device
Shows that the no-load voltage of the equipment is controlled.
2
General alarm LED
Indicates the possible intervention of protection devices such as the temperature protection.
3
Power on LED
Indicates the presence of voltage on the equipment outlet connections.
4
Parameter LEDs
5
7-segment display
readings, while welding, and encoding of the alarms.
6
Main adjustment handle.
Allows the welding current to be continuously adjusted.
7
Main adjustment handle.
Allows the regulation of the arc voltage.
Allows regulation of the arc length during welding.
High voltage = long arc
Low voltage = short arc
Minimum
5 V
1 2 3 4
8
9
5
Wire speed
Allows the regulation of the wire feed rate.
When on, it means the output current display and its adjustment is enabled.
6
7
Welding current
Maximum
55.5 V
20
10
11
12