voestalpine Bohler Welding URANOS NX 2200 SMC Classic Mode D'emploi page 19

8
MMA welding process
Allows the selection of the welding procedure.
MMA (electrode)
2 Step
advance;
4 Step
flow.
9
Wire feed
Allows the manual wire feed without gas flow and without the wire live.
Allows the insertion of the wire into the torch sheath during the welding preparation phases.
1 0
Allows the gas circuit to be cleansed of impurities and the carrying out of the appropriate preliminary gas
1 1
Inductance
Allows electronic regulation of the series inductance of the welding circuit.
Makes it possible to obtain a quicker or slower arc to compensate for the welder's movements and for the
natural welding instability.
Minimum
-30
1 2
Allows selection of the manual MIG (
welded.
Manual MIG process
Synergic MIG process, welding of carbon steel
Synergic MIG process, welding of stainless steel
Synergic MIG process, welding of aluminium
Synergic MIG process, cored wire welding
1 3
Wire diameter
Allows selection of the wire diameter used (mm).
Maximum
+30
) or synergic MIG (
19
SYSTEM PRESENTATION
Default
0/syn
EN