Publicité
en Cleaning and servicing
Fill the empty water tank with luke-
8.
warm water up to the mark and
dissolve a Siemens descaling tab-
let in it.
Reinsert the water tank and place
9.
a container with approx. 1 l capa-
city under the outlet system.
When
10.
button.
The programme starts, cleans and
a
descales the appliance.
pulses.
a
The process takes approximately
a
20 minutes minutes.
symbol lights up.
a
Empty the container and open the
11.
door.
Empty the drip tray and re-insert.
12.
Close the door and place the con-
13.
tainer under the outlet system
again.
symbol lights up.
a
Clean the water tank.
14.
If you have removed the water fil-
ter, re-insert the water filter.
Fill the water tank with fresh, cold,
15.
non-carbonated drinking water up
to the max mark.
When
16.
button.
The programme starts, cleans and
a
rinses the appliance.
pulses.
a
symbol lights up.
a
Remove and empty the drip tray
17.
and coffee dregs container.
Clean the drip tray and the coffee
18.
dregs container and re-insert them
in the appliance.
The programme has ended and
a
the appliance is ready for opera-
tion again.
54
flashes, press the
flashes, press the
Resetting a service programme
If the service programme is interrup-
ted, e.g. by a power cut,
and
will light up.
Clean the water tank.
1.
If you have removed the water fil-
ter, re-insert the water filter.
Fill the water tank with fresh, cold,
2.
non-carbonated drinking water up
to the max mark.
Press the
3.
The service programme starts and
a
rinses the appliance. The process
takes approximately 2 minutes.
Empty the drip tray, clean it and re-
4.
insert.
Close the door.
5.
The programme has ended and
a
the appliance is ready for opera-
tion again.
button.
Publicité
