Publicité
en Basic settings
Press
button
2.
peatedly until the display shows
the required setting.
Confirm with "ok" button
3.
Press the
4.
change the setting.
Confirm with "ok" button
5.
The display shows "Settings
a
saved".
10.2 Overview of basic settings
You can find an overview of the basic settings here.
Setting
Language
Factory reset
W. hardness
Auto Stand-by
Sound
50
re-
.
button
.
Selection
See selection on the ap-
pliance
Select the required lan-
guage.
"W. hardness" 1, 2, 3,
¡
4
Water filter
¡
H2O-Softener
¡
See selection on the ap-
pliance
Sound on
¡
Sound off
¡
Press "<" button
6.
the menu.
Note: If you do not press any other
button within 90 seconds, the appli-
ance switches to the select beverage
to
setting without saving.
Tip: You can change the settings at
any time.
→ "Basic settings", Page 49
Description
Set menu language.
Changes are immedi-
ately displayed.
Restore settings to the
factory settings.
Note: The appliance
rinses and deletes all in-
dividual settings.
Set the appliance to the
local water hardness.
Tip: Ask your local water
supplier about the water
hardness.
Note: If a water softening
system is installed in
your house, select "H2O-
Softener".
Set how long the appli-
ance should wait after
preparing the last bever-
age before automatically
switching itself off.
Switch the tones on or
off.
to exit
Publicité
