Husqvarna DM 230 Manuel D'utilisation page 4

Environmental mark. The product or
package of the product is not domestic
waste. Recycle it at an approved disposal
location for electrical and electronic
equipment.
Note:
Other symbols/decals on the product refer to
special certification requirements for some markets.
Safety definitions
Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING:
injury or death for the operator or bystanders
if the instructions in the manual are not
obeyed.
CAUTION:
damage to the product, other materials or
the adjacent area if the instructions in the
manual are not obeyed.
Note:
Used to give more information that is necessary
in a given situation.
General power tool safety warnings
WARNING:
instructions, illustrations and specifications
provided with this power tool. Failure to
follow all instructions listed below may result
in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
• Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
• Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
4
Make sure that water can-
not leak into the product
when you drill in the ceil-
ing. Use an applicable wa-
ter collector.
Used if there is a risk of
Used if there is a risk of
Read all safety warnings,
Product damage
We are not responsible for damages to our product if:
• the product is incorrectly repaired.
• the product is repaired with parts that are not
from the manufacturer or not approved by the
manufacturer.
• the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
• the product is not repaired at an approved service
center or by an approved authority.
Safety
• Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose
control.
Electrical safety
WARNING:
of shocks from electrical products. Do not
use the product in bad weather conditions.
Prevent that your body touches lightning
conductors and metal objects. Always follow
the instructions in the Operator's manual to
prevent damage.
WARNING:
with water. Water can enter the electrical
system or the engine and cause damage to
the product or short circuit.
WARNING:
without the RDC provided with the tool.
• Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce
risk of electric shock.
• Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
• If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock. An RCD with the action current less
than 30mA is recommended.
• Only connect the product to correctly grounded
outlet.
There is always a risk
Do not clean the product
Do not use the product
1473 - 002 - 08.03.2024