Husqvarna DM 230 Manuel D'utilisation page 2

Introduction..................................................................... 2
Safety..............................................................................4
Operation...................................................................... 10
Maintenance................................................................. 16
Troubleshooting............................................................ 18
Transportation and storage...........................................19
Product description
This Husqvarna drill motor is an electric handheld
diamond core drill. It can be used dry or wet in all
approved materials. Refer to
The diamond drill bit is a hollow drill that has diamond
segments.
If you drill wet, the water goes through the ball valve,
hose and the diamond drill bit. The water flushes
the drilled material out of the slot and decreases the
temperature in the drill bit. Use a dust extractor and a
ring that collects the water to remove the water again.
If you drill dry, use a dust extractor to remove the
material through the drill bit and the dust extractor
2
Contents
Introduction
Intended use on page 2 .
Technical data.............................................................. 20
Accessories.................................................................. 21
Service..........................................................................21
Declaration of Conformity............................................. 22
Registered trademarks................................................. 24
connection. This will decrease the temperature in the
drill bit.
This product has a Smartstart
drill a start hole with the Smartstart
15 .
Intended use
The product is used to drill concrete, brick and rock. All
other use is incorrect.
The product is used in industrial operations by operators
with experience.
™ To
function. Refer to
™
function on page
1473 - 002 - 08.03.2024