EN
Translated version of the guide
Contents
1 - Safety instructions
1.1 Caution - Important safety instructions
1.2 Introduction
1.3 Preliminary checks
1.4 Electrical installation
1.5 Safety instructions relating to installation
1.6 Regulations
1.7 Assistance
1.8 Risk prevention
2 - Product description
2.1 Field of application
2.2 Composition of the kit* - Fig. 1
2.3 Description of the motorisation - Fig. 2
2.4 Description of the circuit board - Fig. 3
2.5 General motor space requirements - Fig. 4
2.6 General view of a standard installation - Fig. 5
3 - Installation
3.1 Assembling the manual release handle
3.2 Unlocking the motorisation - Fig. 6
3.3 Installing the mounting system - Fig. 7 and 8
3.4 Installing the motor - Fig. 9 and 10
3.5 Fitting the end limit brackets - Fig. 11
3.6 Connecting the safety edge - Fig. 12
3.7 Connecting to the power supply - Fig. 13
3.8 Direction of rotation - Fig. 14
3.9 Re-engaging the motorisation - Fig. 15
4 - Quick commissioning
4.1 Memorising the remote controls
4.2 Programming the gate travel - Fig. 18
5 - Operating test
5.1 Using the remote controls - Fig. 19
5.2 Operation of the photoelectric cells
5.3 Operation of the safety edge
5.4 Specific operation
5.5 User training
6 - Connecting additional devices
6.1 General wiring diagram - Fig. 20
6.2 Description of the various additional devices
7 - Advanced parameter setting
7.1 Motor torque - Dipswitches 1 and 2
7.2 Motor direction of rotation - Dipswitch 3
7.3 Auxiliary output - Dipswitch 4
7.4 Lighting time delay - Dipswitch 5
7.5 Wire input operating modes - Dipswitch 6
7.6 Operating modes - Dipswitches 7 to 9
7.7 Safety edge autotest - Dipswitch 10
7.8 Orange light warning - Dipswitch 11
7.9 Cell autotest when closing - Dipswitch 12
7.10 Setting the timed close - Fig. 29
8 - Programming the remote controls
8.1 Memorising the 2- or 4-button remote control for pedestrian opening - Fig. 30
8.2 Memorising the 2- or 4-button remote control to control the auxiliary output - Fig. 31
9 - Clearing the remote controls and all settings
9.1 Clearing the memorised remote controls - Fig 32
9.2 Clearing the programming - Fig. 33
10 - Troubleshooting the safety edge
11 - Technical data
1
1 SAFETY INSTRUCTIONS
> Please read carefully
Please read the safety instructions very carefully as well as the product
installation and user guides before installing and using this product.
1
1
This symbol indicates a danger, the different degrees of
1
which are described below.
2
2
2
Indicates a danger which may result in immediate death or serious
2
injury
2
3
3
Indicates a danger which may result in death or serious injury
3
3
3
3
4
Indicates a danger which may result in minor or moderate injury
4
4
4
Indicates a danger which may result in damage to or destruction of
4
the product
4
4
4
4
4
The drive must be installed and adjusted by a professional
4
motorisation and home automation installer, in compliance
4
with the regulations of the country in which it is to be used.
Failure to follow these instructions could result in serious
4
injury, e.g. crushing by the gate.
4
5
5
1.1 Caution - Important safety instructions
5
5
5
5
For reasons of personal safety, it is important to follow all the
5
instructions, as incorrect installation can lead to serious injury. Retain
these instructions.
5
The installer must train all users to ensure the drive is used in
5
complete safety, in accordance with the user manual.
5
The user manual and installation manual must be given to the end user.
6
The installer must explain clearly to the end user that installation,
6
adjustment and maintenance of the drive must be performed by a
6
professional motorisation and home automation installer.
6
6
6
1.2 Introduction
6
> Important information
6
This product is a motorisation for a sliding gate, for residential use
6
as defined in standard EN 60335-2-103, with which it complies. The
6
main purpose of these instructions is to satisfy the requirements of
6
the aforementioned standard and to ensure the safety of equipment
7
and persons.
7
7
7
Any use of this product outside the field of application described in
7
these instructions is prohibited (see "Field of application" paragraph
7
in the installation manual).
7
The use of any accessory or any component not recommended by
7
Somfy is prohibited, on safety grounds.
Elixo 500 230V RTS / Elixo 800 230V RTS
DANGER
WARNING
PRECAUTION
ATTENTION
DANGER
WARNING
WARNING
Copyright© 2017 SOMFY ACTIVITES SA. All rights reserved.