Warning against hot surfaces!
ATTENTION: Some parts of the product may become
extremely hot and cause burns. Special care is required if
children and vulnerable persons are present.
2.2 Additional safety indications
Danger to life due to electrical current!
Danger to life in case of contact with live cables or components!
The appliance is only suitable for indoor operation!
Before connecting the appliance, compare the connection data on
the name plate (voltage and frequency) with the data from your
electricity grid. Ensure that the data tallies so that no damages to
the appliance are incurred.
Do not commission an appliance which has been dropped.
Do not use if visible signs of damages can be seen on the heater.
The heater must be placed on a firm, flat and level base.
Never open the appliance's casing. If live connections are touched
and/or the electrical and mechanical setup changed, the risk of
electric shock exists!
Ensure that the supply cable is not laid over hot surfaces and/or
sharp edges.
Pay attention that the supply cable is neither bent nor jammed.
10
GB/IE/NI/CY/MT