Publicité
2
Heating level
2:
3
Heating level
3:
"MIN" position temperature controller
"MAX" position temperature controller
Note: The control lamp 7 only goes out when the
the temperature controller 9 has been turned anti-
clockwise until an audible click is heard.
Note: The oil radiator only heats up when the the
temperature controller 9 is turned clockwise until
an audible until an audible click is heard.
4.2 Setting the temperature controller
Start the appliance using the heating level
switch to set 8 the desired heat output.
Rotate the temperature controller 9 clockwise
up to the limit stop.
9
If the desired temperature has been reached,
rotate the temperature controller 9 back so far
anticlockwise until you hear a clear click. The
control lamp 7 goes off.
An integrated mechanical thermostat now swit-
ches the heating function and control lamp 7
on/off automatically.
If the heating level switch
8 is in this position,
the oil-filled radiator
provides a heat output
of 900 W.
If the heating level switch
8 is in this position,
the oil-filled radiator
provides a heat output of
1500 W.
4.3 Switching the appliance off
Set the heating level switch 8 to position "0".
Set the infinitely variable temperature controller
9 to position " ". The control lamp 7 goes off.
9
Remove the mains plug from the mains socket.
Before covering or putting the appliance
away, wait until it has cooled down!
4.4 Frost protection function
You can set the oil-filled radiator so that it goes on
automatically and heats when the room temperature
reaches approx. 7 °C.
Then, connect the oil-filled radiator to an eart-
hed socket protected by an FI circuit breaker.
Then, switch the appliance on by setting the
heating level switch 8 to „1", „2" or „3" and
the temperature controller 9 to " ".
9
The oil-filled radiator now switches on when the
room temperature is approx. 7 °C. As soon as
the room temperature exceeds approx. 7 °C, the
oil-filled radiator switches off.
8
8
GB/IE/NI/CY/MT
13
Publicité
