Charcoal filtration system
Your wine is a living object that breathes through the cork of its bottle. In order
to preserve the quality and taste of your fine wines, they must be stored at the
ideal temperature and ambient conditions. Your cellar is equipped with an active
charcoal filtration system to ensure air purity, cooling efficiency, and to maintain an
odor free cabinet for the storage of your fine wines. The filter assembly is located
at the rear panel inside your cellar.
Keep in mind, that this filter must be changed every 12 months.
1.
Remove the bottles of wine stored on the two (2) shelves in front of the filter.
2.
Remove the shelves and set aside to be replaced once you have changed the
filter
3.
Hold the filter and turn it at 45 degrees in the counter-clockwise direction and
then pull it out.
4.
Remove the existing filter and replace with a new one.
5.
Put the new filter into the hole and then turn the filter at 45 degrees in
clockwise direction.
Turn left to remove filter.
EN
35