WINE STORAGE
•
This appliance is intended to be used exclusively for the storage of wine.
•
This refrigerating appliance is not suitable for the freezing foodstuffs.
•
The wine cooler is recommended to be designed at 12°C.
•
The shelves placed in factory mode is the most efficient use of energy for the
refrigerating appliances.
•
The following combination of shelves is recommended for energy to be used
as efficiently as possible by the refrigeration unit.
•
There are 9 shelves and 2 display shelves in toal.
first shelf
second shelf
third shelf
fourth shelf
display shelf
•
When the surrounding temperature is 25°C and the wine cooler has no
bottle loaded, it will take around 30 minutes to increase the wine cooler's
temperature from 5°C to 12°C. Under the same circumstance, it will take
around one hour to decrease the wine cooler's temperature from 12 °C to
5 °C. The less the temperature span is, the less time it will take
•
The wine cooler is recommended to be designed at 12 °C.The energy
consumption is 0.411kWh/24h. If the setting temperature is higher than 12 °C,
the energy consumption will be lower. If the setting temperature is lower than
12 °C, the energy consumption will be higher.
•
When the compressor works for 12 hours, the compressor will stop and
defrost for 30 minutes
first shelf
second shelf
third shelf
fourth shelf
display shelf
EN
31