EN
34
MAINTENANCE AND CLEANING
WARNING
Risk of electric shock
Failure to unplug the appliance during service and cleaning
could result in electrical shock or other personal injury.
Cleaning
•
Disconnect the appliance before cleaning.
•
Clean the appliance with soft cloth or sponge by water.
•
Do not use organic solvents, alkaline detergent, boiling water, washing
powder or acid liquid etc.
•
Do not flush the compartment of the appliance.
•
Clean regularly surfaces that can come in contact with accessible drainage
systems.
Power cut
Most power cuts could be resolved within a short time. To protect your wines
during a power cut, avoid opening the door as much as possible. During very long
power cuts, take the necessary measures to protect your wine.
Out of service for long time
Remove all bottles from the appliance, switch off, defrost, clean, dry, and leave the
door open to prevent mould developing within the appliance.
If the appliance is disconnected or if there is a power cut, you must wait at least
five minutes before re-starting.
Moving the appliance
•
Cut off the power supply and unplug the appliance.
•
Remove all bottles from the appliance.
•
When moving the appliance, do not lean the appliance over 45 °C.
Error Codes
Failure
E1
Temperature sensor disconnect.
E2
Temperature sensor failure.
E3
Evaporator temperature sensor disconnected.
E4
Evaporator temperature sensor failure.
Contact us for a
service call.