Publicité
NOTE
This is the filter time: 1s, 2s, 3s, or 4s, which determines how long it takes to display the weight.
A 4-second filter time provides more accurate results but slower display, while a 1-second filter
time offers faster display but less accuracy.
6. Turn Off the Product:
•
Press the
Hold Function
1. Press the
2. Wait for the reading to stabilize, then press the
display.
3. Remove the item from the platform. The reading will remain on the display.
4. Press the
Calibration
Calibration Using an External Calibration Weight
Calibration is typically required when the weighing machine is first installed or if it has been moved a significant
distance from its original location. Always allow the product to warm up for 30 minutes before performing the
initial calibration.
NOTE
For Larger Capacity Scales
•
•
Calibration Procedure:
1. Press and hold the
.
2. Press the
.
3. Press the
unit. Press the
key to turn off the product.
key to turn on the product and place the item on the platform.
key again to exit hold function mode.
The WB series products are factory-calibrated. Recalibration is usually unnecessary
unless significant inaccuracies are observed.
If recalibration is needed, use a test weight that is at least 2/3 of the full capacity of
the product to ensure accurate weighing.
key, then press the
key. The display will show
key to select the calibration unit (kg or lb). A triangle icon will indicate the selected
key to confirm. The display will show
EN
key. The "." indicator will appear on the
key to turn on the product. The display will show
. Press the
key again, and the display will show
again.
Publicité
