Publicité
Store the current weight value.
Switch between different weighing units.
Zero function: Activates if the load weight is below 4% of full capacity.
Tare function: Activates if the load weight is between 4% to 100% of capacity.
Send data to an external device via the RS232 connector.
Program Options
Interface Settings
1. Press the
key, then press the
.
2. Press the
key, and the display will show
3. Press the
key again, and the display will show
4. Press the
key to select one of the following options:
: Serial data output is disabled.
•
•
: Manual mode, requires pressing the
: Automatic print when the product is stable.
•
•
: Continuous data output.
5. Press the
key to turn off the product.
Function settings
Setting Auto Shut-Off
1. Press the
.
2. Press the
•
: Auto shut-off enabled.
•
key to turn on the product. The display will show
key, then press the
key to select the Auto Shut-Off mode:
: Auto shut-off disabled.
EN
or
.
.
key to output data.
key to turn on the product. The display will show
or
or
Publicité
