Publicité
1. Place the unit holder in the designated position.
2. Insert the power adapter plug into the socket at the back of the balance.
3. Connect the AC adapter to ensure proper power supply.
Placement of Product
Proper placement is crucial to ensure your product operates at its full potential. The following conditions can
affect the accuracy and performance of the product: air flow, temperature variations, and direct sunlight. Please
adhere to these recommendations when choosing a location:
•
Place the product on a solid, firm, and preferably vibration-proof, horizontal base.
•
Ensure that the weighing machine cannot be shaken or knocked over.
•
Protect the product from direct sunlight.
•
Avoid drafts and excessive temperature fluctuations.
•
Do not place the product near or on magnetic surfaces.
NOTE
•
•
Please complete the following steps before using the product:
Step 1:
Connect the cable to the load cell and securely plug in the metal connectors while the power is off.
Step 2:
Adjust the four scale feet to ensure the product is level and positioned horizontally.
Do not turn the indicator on until all connections have been made.
Turning on the indicator before completing the connections may cause damage to
the system if connections are made while the indicator is powered on.
EN
Publicité
