Publicité
REPLACING THE INNER LAMP
• A replacement bulb is available to you should the original stop working. If this is the case,
you can call customer service at the address listed in the "WARRANTY" section to get a
replacement bulb. Be sure to perform the following steps carefully as they comprise of
manipulating small glass parts.
• Unplug the appliance from the outlet and allow it to cool completely to avoid electric
shocks or burns.
• With a screwdriver, unscrew the screw holding the metal clamp against the glass cover.
• Using a tool such as a flat-ended screwdriver, carefully remove the glass to gain access
to the lightbulb.
• Remove the lamp by shifting it upwards and ejecting the bi-pin end from its place. To
replace with new bulb, align the two pins with the small holes in the original bulb base
and plug back in, ensuring the new lamp is securely in place.
• Place the glass cover back into a secure position, ensuring it fits neatly, and screw the
metal clamp back into its original position to prevent glass cover from falling off.
Do not immerse the OVEN in water or any other liquid. Any other servicing should be
Problem
1. Appliance is not plugged in.
2. You have not pressed the start/
The unit does
stop button.
not work
3. The oven doors are not properly
closed.
1. Too much food is placed into the
Food not
oven.
cooked
2. The temperature is set too low.
Food is not
Some foods need to be turned or
fried evenly
shaken during the cooking process.
1. There is oil residue in the oven.
White smoke
2. Accessories have excess grease
coming from
residue from previous cooking.
the unit
3. Oil is dripping on heating element.
1. Wrong type of potato being used.
French fries
are not fried
2. Potatoes not blanched properly
evenly
during preparation.
ERROR CODES:
E1
The digital screen displays E1 when the operating status sensor of cavity A is disconnected.
E2
The digital screen displays E2 when the operating status sensor of cavity A shorts out.
performed by an authorized service representative.
TROUBLESHOOTING
Possible Cause
1. Plug power cord into wall socket.
2. Make sure you have selected a function
and pressed the start button.
3. Make sure both doors are securely shut.
1. Use smaller batches for more even frying.
2. Raise temperature and continue cooking.
Flip or shake your food halfway into the
cooking process and continue cooking.
1. Wipe down to remove excess oil.
2. Clean the accessories after each use.
3. Place baking tray underneath air rack or
basket.
1. Use fresh, firm potatoes.
2. Use cut sticks and pat dry to remove
excess starch.
English - 12
Solution
Publicité
