Publicité
Commissioning and operating the PPE4.L
The heater automatically turns on when the flow exceeds 1.8 l/min. The control system
selects the appropriate heater power based on: the amount of water drawn, the set water
temperature, and the inlet water temperature. Closing the water flow turns off the heater.
Pressure switch
Note
The pressure switch may activate due to water pressure surges or as a result
of damage to the heater.
Danger
If the pressure switch activates, contact an authorized service center.
Safety trip enabled
DE;DK;EN;ES;FR-119B_f.1933
Safety trip cut out
EN
47
Publicité
