Publicité
Configuration
Note
The heater is factory set to 52ºC.
46
10kW setting for PPE4 - 10/11/12/15
17kW setting for PPE4 -17/18/21/24
11kW setting for PPE4 - 10/11/12/15
18kW setting for PPE4 -17/18/21/24
12kW setting for PPE4 - 10/11/12/15
21kW setting for PPE4-17/18/21/24
15kW setting for PPE4 - 10/11/12/15
24kW setting for PPE4 - 17/18/21/24
Setting the maximum temperature limit to 52°C.
Locking the ability to change the temperature setting.
Disabling air detection with the probe (DO NOT SWITCH!)
Disabling triac damage detection (DO NOT ADJUST!)
Publicité
