Publicité
4. Commissioning
– User: admin
– Password: the individual password next to "PW:" on the sticker
1. Select the home network under
cryption method is usually appropriate, but this can be adjusted if necessary.
INFO
i
No DHCP (e.g. corporate network)
If no DHCP is available, uncheck
required data (fixed IP address). If necessary, ask the network administrator for the information.
2. Select Connect.
3. If the Smartset portal (web or app) is to be used to remotely control the system via the internet,
Step 4.
[} 20], otherwise
4. On the opened web page, select Settings.
5. Check
Activate internet connection with the WOLF SmartSet
6. Select
Save
ð After the restart, the system can be managed via the Smartset portal.
7. Select Restart.
8. Open the Smartset app.
9. Select
Add system
10. Select
Add
11. Fill in the data fields
plate) and
12. Select system from the
13. Enter the serial number of the heating or ventilation appliance (sticker with bar code on the appliance)
under
Information
ð The system is now available in the Smartset app.
4.5
SmartHome integration
Instructions for integrating the WOLF Link into a smart home system:
www.wolf.eu/inbetriebnahme-smarthome
20 | WOLF GmbH
WLAN settings
☞ Step 7.
settings.
or select
Profile
manually.
Desired system
Interface module password
System
List.
>
Appliance serial number
and enter the password. The pre-selected WLAN en-
Automatically obtain network settings (DHCP)
[} 20].
>
System List
> +.
name,
Interface module serial number
(see WOLF Link type plate) and confirm with Add.
and save.
portal.
(see WOLF Link type
Link Home/Pro
and enter all
☞
8909319 | 202410
Publicité
