m WARNING! Risk of
electric shock! Never use a
damaged product . Disconnect
the product from the power
supply and contact your
retailer if it is damaged .
The product is not to be used
if it has been dropped, if there
are visible signs of damage .
The product is powered at all
times while it is connected to
the power supply .
Before connecting the product
to the power supply, check that
the voltage and current rating
corresponds with the power
supply details shown on the
product's rating label .
Regularly check the power
plug and the power cord for
damages . If the power cord is
damaged, it must be replaced
by the manufacturer, its service
agent or similarly qualified
persons in order to avoid a
hazard .
Protect the power cord against
damages . Do not let it hang
over sharp edges, do not
squeeze or bend it . Keep the
power cord away from hot
surfaces and open flames .
CAUTION! Hot surface!
During use the product gets
hot . Do not touch the product
while in use nor immediately
after use .
During use, care must be taken
as low heat may be generated
at the handle .
Operation
The product must not be
left unattended while it is
connected to the supply mains .
Do not move the product while
it is in operation .
Do not use the product without
an inserted set of plates .
Do not place the product on
hot plates (gas, electric, coal
cooking range etc .) .
GB/IE/NI
9