Publicité
ENGLISH
Technical Data
Sawhorse
Art. No .........................................................................................................................................................94899
Dimensions ................................................................................ .................................. 800 x 820 x 790 mm
Weight net/gross ..............................................................................................................................5,6/5,9 kg
- Absolutely stable due to the variably adjustable
width of the support legs
- 3-fold adjustable working height due to variable
adjustment of the claw angle.
Requirements for operating staff
The sawhorse has exclusively been designed to cut
logs of firewood with a length of 1.0 m and 0.5 m.
Safety Instructions
- When setting the sawhorse position, make sure the
surface is as flat as possible. Please make absolutely
sure that the sawhorse stands with all 6 legs firmly on
the ground and can neither wobble nor tip over.
- The sawhorse should be placed on a flat, non-slip
surface
- The sawhorse may only be used by one person.
Persons standing around must keep a safety distance
of at least 3 m.
- Bolts and nuts of the sawhorse must always be
tightly tightened. Make sure the saw chain is sharp.
- Place the wood in the clamping toothing of the
sawhorse so that it cannot rotate. Firmly guide the
power saw with both hands according to the safety
regulations and allow the saw to slide slowly and
evenly through the wood without exerting too much
pressure.
- In case the securing and adjustment device is
damaged, as well as in case of any other damage to
the sawhorse, the device and the sawhorse can no
longer be used.
- The wood to be cut may only protrude beyond the
chainsaw so that it cannot be tilted. It is not allowed
to process several pieces of wood at the same time.
- The wood to be cut may not be held by hand (no
one-hand use of a chainsaw)
- Caution when opening and closing the sawhorse.
- Danger of crushing hands and fingers.
- Do not stand on the sawhorse and do not use it as
a stage
- When working with the sawhorse, it is essential
10
to use protective gloves and protective equipment
necessary for cutting with a saw! In addition, observe
the safety instructions applicable to chainsaws!
- Be careful not to get injured by the sharp edges or
corners.
Symbols
Read the Operating Instructions!
Wear protective clothing with cut through
resistant ply !
Wear ear protectors!
Wear eye protective goggles !
Wear safety cut through resistant shoes!
Wear protective gloves !
Wear protective helmet !
Protect against humidity
Always keep children and unauthorised
persons out of reach of the appliance.
Keep distance of persons!
Observe to keep out of dangerous zone
Warning against thrown-off items
Slow
Publicité
