Publicité
EN-58
9. Technical Data
Conditions
The technical data is valid under the following conditions:
Indoor Use Only
Altitude:
Operating
temperature:
Humidity
Electrical Supply:
Mains supply voltage
fluctuations:
Overvoltage category
(Installation Category):
Pollution Degree:
Power line fuse:
Specifications
Model
Capacity
Readability
Repeatability (Std Dev) (g)
Moisture range
Heating Element
Drying Programs
Temp range
Switch-off Criteria
Adjustment
Power
Operating temperature range
Display type
Display results
Pan size (mm)
Up to 2000m
5 °C to 40 °C.
Maximum relative humidity 80% for temperatures up to 31 °C
decreasing linearly to 50% relative humidity at 40°C.
100 - 120V ～, 5A or 200 - 240V ～, 2.5A (depending on region)
Up to ±10 % of the nominal voltage
II
2
6.3A 250 VAC for 100V-120VAC power supply
2.5A 250VAC for 200V-240VAC power supply
MB62 Instruction Manual
MB62
90
0.01%/0.001g
0.10% (3g sample)
0.018% (10g sample)
0.01% to 100%
(0.01% to 1000% for regain mode)
Carbon fiber heater
Standard, Fast, Ramp, Step
40°C - 200°C
Timed, Auto (30, 60, 90 seconds),
free (mg / s), free (% / s), manual
External adjustment mass - 50g
100V – 120 VAC 5A 50/60 Hz or
200V – 240 VAC 2.5A 50/60 Hz
(depending on region)
41° to 104°F / 5° to 40°C
5', Segment and dot matrix
%moisture, %solids, %regain, time,
temperature, weight, method name
90
Publicité
