Publicité
MB62 Instruction Manual
5.3. Weight and Temperature Adjustment
5.3.1. Weight Adjustment
The Moisture Analyzer can be adjusted with an external mass of 50 grams. Adjustment
of the Moisture Analyzer is not absolutely necessary for a correct moisture determination
as the measurement is relative. The balance determines the weight of the sample before
and after drying and the moisture is calculated on the basis of the ratio between wet and
dry weights.
Nevertheless, you should adjust the built-in balance under the following conditions:
• If this is stipulated by your quality assurance system (GLP, GMP, ISO 9001).
• If you suspect the analyzer has been abused.
5.3.1.1. Perform Weight Adjustment
Prerequisites
1. The moisture analyzer is levelled.
2. Have an external mass of 50 grams.
3. The sample pan is removed.
Steps of Weight Adjustment
1. Long press the Rotation knob to enter the menu.
2. Navigate to
process and display Adjustment in progress....
3. Place the 50g mass on the center of the Pan Holder.
4. Then the screen will display "Adjustment in progress...
> Adjustment > Weight Adjustment . The unit will initialize the
EN-35
Publicité
