Handset Name; Setting The Date And Time - Topcom Butler 2562 Mode D'emploi

HL_B2562_v3.qxd
ENGLISH
5. Press OK
6. Select KEY PRESS using the
7. Press OK
8. Select ON to activate, OFF to deactivate
9. Press OK to confirm.
4.4.2 Low battery
Proceed as before, but select at point 6 "LOW BATTERY" instead of "KEY PRESS".
4.4.3 Handset out of range
Proceed as before, but select at point 6 "OUT OF RANGE" instead of "KEY PRESS".

4.5 HANDSET NAME

This function allows you to personalise each handset.
1. Enter the menu by pressing
2. Select HANDSET MENU using the
3. Press OK
4. Select HANDSET NAME using the
5. Press OK
6. Enter the name
7. Press OK to validate
While entering the name, press
hout taking any modifications into account.
4.6 SETTING THE DAY AND TIME
1. Enter the menu by pressing /OK
2. Select "SETUP"
3. Press OK
4. Select "TIME SETTING"
5. Press OK
6. Enter day and month and press OK to confirm
7. Enter hours and minutes and press OK to confirm
The new date and time is shown.
Note: The day and time will be automatically set by the network if the network send the date and time together with
the callerID.
18
24-03-2003 10:01
and keys
/OK
and
and
to delete a character and press and hold
Page 18
keys
keys
to exit the menu wit-
Topcom Butler 2562