Handset Name; Keypad Beeps; Setting The Contrast; Autotalk - Topcom BUTLER 5710 Manuel D'utilisateur

6.2

Handset name

You can change the name displayed on the handset during standby (max. 9 characters).
1 Enter the menu.
2 Select "Handset" and confirm.
3 Select "Handset name" and confirm.
4 Enter the name you want.
4 5 6
g h i j k l m n o
5 Press the soft menu key to correct.
6 Select "Save" to confirm.
7 Return to standby.
6.3

Keypad beeps

1 Enter the menu.
2 Select "Handset" and confirm.
3 Select "Keypad beep" and confirm.
4 Select "On" or "Off" and confirm.
5 Return to standby.
6.4

Setting the contrast

1 Enter the menu.
2 Select "Handset" and confirm.
3 Select "Contrast" and confirm.
4 Select the contrast you want (1-8) and confirm.
5 Return to standby.
6.5

Autotalk

When there is an incoming call and the handset is on the base, the phone automatically takes the
line when lifted from the base. This function can be turned on or off.
1 Enter the menu.
2 Select "Handset" and confirm.
3 Select "Autotalk" and confirm.
4 Select "On" or "Off" and confirm.
5 Return to standby.
6.6

Prefix code

It is possible to use your telephone with a prefix number. When dialling telephone numbers, you
can add automatically the prefix code before the number.
1 Enter the menu.
2 Select "Handset" and confirm.
3 Select "Prefix" and confirm.
4 Select "Edit" and confirm.
Personalise the handset
12