Using The Alphanumerical Keypad; Using The Menu; Personalisation; Adjusting Speaker Volume - Topcom Butler 2562 Mode D'emploi

HL_B2562_v3.qxd
3. Press the first letter of the name. The first name that starts with this letter or the nearest letter in the
alphabet will be displayed.
4. Go through the list of names with the
5. Press to dial the number of the correspondent whose name is displayed.
To see the number before dialling, carry out steps 1 to 3 from before and press Ok.

3.15 USING THE ALPHANUMERICAL KEYPAD

With your telephone you can also enter alphanumeric characters. This is useful for entering a name into
the phonebook, giving a name to a hand-set, ...
To select a letter, press the corresponding key as many times as is necessary. For example to select an
'A', press '2' once, to select a 'B', press '2' twice and so on. To select 'A' and then B consecutively,
select 'A', wait until the cursor moves on to the next character, then press '2' twice.
To select a space, press 1.
To select a dash, press '1' twice
The keypad characters under each keys appears on top of the screen whenever a key is pressed!

3.16 USING THE MENU

A wide range of telephone functions are accessible through a user friendly menu.
1. To enter the menu, press
2. Scroll through the selections using the
the first after the last).
3. To validate a selection, press OK
4. To return to the previous menu, press

4. PERSONALISATION

4.1 ADJUSTING SPEAKER VOLUME

There are two ways to set the speaker volume:
4.1.1 Speaker volume during call
During conversation, press the
4.1.2 Set the default speaker volume
1. Enter the menu by pressing
2. Select HANDSET MENU using the
Topcom Butler 2562
24-03-2003 10:01
and
/OK
and
or key to change the volume accordingly.
/OK
and keys
Page 15
keys. The list scrolls in an alphabetical order.
keys, the selections scroll in a loop ( you return to
ENGLISH
15