Internal Call Transfer; Make A 3-Way Conference Call; Speaker Volume During Call; Microphone Mute - Topcom BUTLER E600 TWIN Manuel D'utilisateur

Using the telephone
2.6

Internal call transfer

Transfer an external call to another handset.
2.7

Make a 3-way conference call

The conference call feature allows one external call to be shared with two handsets (in intercom).
During an external call:
2.8

Speaker volume during call

2.9

Microphone mute

It is possible to mute the microphone during a conversation.
2.10

Using the alphanumerical keypad

With your telephone, you can also enter alphanumeric characters. This is useful for entering a name
into the phonebook, giving a name to the handset, ...
To select a letter, press the corresponding key as many times as necessary. For example, to select
an 'A', press '2' once. To select a 'B', press '2' twice and so on. To select 'A' and then 'B'
consecutively, press '2' once, wait until the cursor moves on to the next character, then press '2'
twice.
22
1 Press the left menu key.
2 Select "INTERCOM" and press OK.
3 Enter the number of the internal handset (1 to 5), the external caller is put
on hold.
4 When the other handset picks up, press the on-hook key to hang up and
transfer the call.
If the internal correspondent does not pick-up, press the on-hook key again to
reconnect to the external caller on line.
5 Press the on-hook key to hang up or put the handset back on the base.
1 Press the left menu key.
2 Select "INTERCOM" and confirm.
3 Enter the number of the internal handset (1 to 5), the external caller is put
on hold.
4 When the other handset picks up, press and hold the '*'-key to establish the
conference call.
If the internal correspondent does not pick-up, press the on-hook key to
reconnect to the external caller on line.
1 During a conversation, press the up or down key to change the volume
accordingly.
1 Press the right menu key. You can talk freely without being heard by the
calling party.
"MUTED" is displayed.
2 Press the right menu key again to return to normal mode.
Press '1' to select a space.
Press right menu key to delete a character.