Publicité
en
|
Description
Icon
Colour
Red
Red
3.5 Intended use
The Dräger FPS IMD In-Mask Display and the Dräger UCF FireCore thermal
imaging camera form a system for capturing and displaying thermal images.
22
Meaning
Overheat indicator for the In-Mask Display (icons
are flashing)
Overheat indicator for the camers (icons are flash-
ing)
This symbol indicates the high temperature mode.
This mode is automatically activated when a large
part of the displayed thermal image exceeds 130 °C.
Range in which the temperature is measured
Standby
The In-Mask Display has detected a thermal imag-
ing camera that is paired with another In-Mask Dis-
play. Therefore, no connection can be established.
The In-Mask Display has detected a thermal imag-
ing camera. The thermal imaging camera and the In-
Mask Display are paired. A Wi-Fi connection will be
established shortly.
The pairing of the thermal imaging camera and the
In-Mask Display has failed.
A Wi-Fi connection between the thermal imaging
camera and the In-Mask Display has been estab-
lished.
The Wi-Fi connection to the thermal imaging camera
has been broken.
The thermal imaging camera is not available.
The data transfer is active.
The data transfer has failed.
The data transfer was successful.
Dräger FPS IMD
Publicité
