Publicité
en
|
Safety-related information
1
Safety-related information
Dräger FPS IMD
–
Before using this product, carefully read these instructions for use and those
of the associated products.
–
Strictly follow the instructions for use. The user must fully understand and
strictly observe the instructions. Use the product only for the purposes
specified in the intended use section of this document.
–
Do not dispose of the instructions for use. Ensure that they are stored and
used appropriately by the user.
–
Only trained and competent users are permitted to use this product.
–
Comply with all local and national rules and regulations associated with this
product.
–
Only trained and qualified personnel are permitted to inspect, repair and
service the product as detailed in these instructions for use (see
"Maintenance", page 27). Further maintenance work that is not detailed in
these instructions for use must only be carried out by Dräger or personnel
qualified by Dräger. Dräger recommend a Dräger service contract for all
maintenance activities.
–
Use only genuine Dräger spare parts and accessories. Otherwise, the
proper functioning of the product may be impaired.
–
Do not use a faulty or incomplete product. Do not modify the product.
–
Notify Dräger in the event of any component fault or failure.
2
Conventions in this document
2.1 Trademarks
Trademark
UCF
FPS
The following webpage lists the countries in which Dräger's trademarks are
registered: www.draeger.com/trademarks.
The trademarks mentioned are only registered in certain countries and not
necessarily in the country in which this material is released.
3
Description
3.1 Product overview
See Figure A on the fold-out page
18
Trademark owner
Drägerwerk AG & Co. KGaA
Drägerwerk AG & Co. KGaA
Dräger FPS IMD
Publicité
