19
Attention:
(1) Before using any pharmaceutical products or medicines, please consult your doctor to ensure that you
are using the product correctly.
(2) Do not use the medication of high concentrations, high viscosity, oily medicines, volatile liquid medicine,
doing so may lead to abnormal atomizing.
(3) It is recommended not to exceed the capacity of medication cup. If medication cup is fulled with medica-
tion, be sure to cover the cup lid to prevent leakage.Medication in the cup should not be less than 2mL(The
maximum capacity for the medication cup is 10mL).
3. Close the cup lid.
4. Install medication cup to main unit.
5. Assemble the mask (mouthpiece), as shown below:
Operation method:
1. Turn on the power: Press "ON/OFF" button for more than 1 second, power indicator (green) lights and
device starts atomizing.
Attention:
If medication cup is not loaded with any medication, the device will automatically shutdown after power
indicator lighting about 1s.
After startup, the quantity of medication mist may change at the beginning of device working, which is
a normal phenomenon.
2. Inhalation: Hold the device in hand, put on the mask or mouthpiece, slowly inhale the medication mist.
Attention:
(1) The angle of inclination should be within 45° during nebulizing.
(2) During use, please do not strongly shake the device to prevent abnormal use.
(3) Duration of each inhalation should be no more than 20 minutes.
(4) Nebulizing treatment is easy and comfortable, if you have any discomfort during use, please stop
the treatment.
3. Turn off the power: When the treatment is over, and medication almost runs out, the nebulizing sheet
will generate a high-frequency sound, and then the device automatically turns off. If you need to shut
the device down during use, please press the "ON/OFF" button for more than 1 second.
Attention:
At the end of treatment, it is normal that a little medication left in medication cup after automatically
shutdown.
ENGLISH