EN
Instruction Manual
Specifications
Operation Mode
Paper Formats
Number of Punch Slots
Punching Paper (70 gsm)
Punching PVC Plastic Foils (0.2mm)
Max. Comb Diameter
Max. Wire Diameter
Binding Capacity
Net Weight
Dimensions (H x W x D)
Location of controls
1 Punching Handle
2 Binding Handle
3 Comb Opening Teeth
4 Comb and Wire Punching Slots
5 Paper Edge Guide
6 Clippings Drawer
7 Margin Adjuster
8 Wire Adjuster
9 Wire Closing Slot
J Wire Holder
Maintenance
Please ensure the clippings tray is emptied on a regular
basis. This may prevent your machine from overloading.
Service
m
WARNING: Do not attempt to service or repair the
punch. Failure to observe this warning could result in
severe personal injury or death.
Disconnect the plug from the socket outlet and contact
GBC Technical Service when one or more of the following
has occurred.
• The power supply cord or attachment plug is damaged.
• Liquid has been spilled into the punch.
• The punch is malfunctioning after being mishandled.
• The punch does not operate as described in these
instructions.
4
GBC MultiBind MB20
Manual
A4, A5, US Letter
21 Comb / 34 Wire
20 Comb / 20 Wire
2
51mm
14.3mm
270/125
17kg
165 x 430 x 400mm
Safety instructions
m
YOUR SAFETY AS WELL AS THE SAFETY OF OTHERS
IS IMPORTANT TO ACCO BRANDS EUROPE. IN THIS
INSTRUCTION MANUAL AND ON THE PRODUCT
ARE IMPORTANT SAFETY MESSAGES. READ THESE
MESSAGES CAREFULLY.
• In order to avoid overloading your machine, please refer
to the maximum punch guide located on the front of your
machine before punching.
• When punching PVC/PP covers, we recommend the
cover be punched with some paper either side.
• DO NOT punch metallic objects such as staples or paper
clips.
• Please empty the waste tray regularly.
• Ensure that the machine is operated on a flat stable
surface.
• Never lift the machine by the punching handle. Always
use the hand grips located on the side of the machine.
• To avoid risk of injury DO NOT put your fingers into the
wire binding channel.
• The binder is not to be exposed to temperature / humidity
conditions that would cause condensation. Maximum
ambient temperature: 40ºC
• This equipment is not suitable for use in locations where
children are likely to be present.
• Use the device in a suitable, properly installed and easily
accessible mains power socket. Locate near the outlet
and do not use extension cords. Make sure the device
can be disconnected from the mains at all times.