Proceq DIGI-SCHMIDT 2000 ND Mode D'emploi page 43

5 .2 .3 Display Memory
The measurement series number, the impact direction
of the concrete test hammer and the measured rebound
values R after deletion of the outliers, as well as the
average of the rebound values R or of the compressive
strength of the concrete are displayed.
From version 4.0 on the measured and calculated
values, as well as all parameters set are displayed.
Fig 5.8 Example of "Display Memory"
1) Date
2) Alpha-numeric number
3) Impact direction, mean value method
4) Conversion curve/factors/carbonation depth
5) Individual impact rebound values
6) Mean values of R and fc*)
7) Minimum/maximum R, standard deviation
© 2017 Proceq SA
1)
2)
3)
4)
5)
6)
7)
*) For invalid measuring series using the median method
"F>20%" is displayed
5 .2 .4 Output on the Printer
For data transmission, use the printer cable
Art. No. 330 00 460. Printing can be performed on all
commercially available printers with a serial port. The
following printing options are available:
- Printer is connected to the display unit during measu-
rement (online):
After completion of a measurement series (the prese-
lected no. of test impacts has been performed), the
data are sent to the printer. Transmission is also pos-
sible at any time by pressing the PRINT key.
- Printing via memory:
In the sub-menu "Display memory" the desired measu-
rement series can be selected with the↓ ↑ keys.
Printing is performed by pressing the PRINT key.
Fig. 5.9 Example of a print protocol
Measuring Process 15