Publicité
Routine Maintenance
EN
Used Water Tank
1. Remove the used water tank, open its cover and pour out the used water.
2. Rinse the used water tank with clean water, and use the provided
cleaning tool to clean the inner wall of the used water tank.
Note: The float ball in the used water tank is a movable part. Do not apply
too much force when cleaning it to avoid damaging it.
20
Main Brush
1. Press the brush guard clips inwards to remove the brush guard and lift the
brush out of the robot.
2. Pull out the brush covers at both ends of the brush as shown in the figure.
Use the provided cleaning tool to remove any hair tangled in the brush.
Reinstall the brush covers on both ends of the brush, and then reinstall the
brush. Press on the brush guard to lock it in place.
Publicité
