Publicité
How to Use
3. Automatically empty the dust box and wash and dry the mop
pads
After the robot finishes a cleaning task and returns to the base station to
charge, the base station will automatically start emptying the dust box. Then
it will wash and dry the mop pads.
Note:
·
If the auto-empty function is turned off in the app, the base station will not
automatically empty the dust box.
·
The base station will empty the dust box according to the setting in the app.
4. Clean the used water tank
After the robot has completed its task, please clean the used water tank to
prevent any odor.
Mop after Vacuuming
Enable the mopping after vacuuming function in the app, and the robot will
automatically lift the mop assembly to vacuum the floor. After vacuuming
is completed, the robot will return to empty the dust box, and then start
mopping after automatically lowering the mop assembly.
Vacuum Only
Enable the vacuuming function in the app, and the robot will automatically lift
the mop assembly and start vacuuming.
Mop Only
Enable the mopping function in the app, and the robot will check if the mop
assembly is installed. If not, manually install the mop assembly, and then the
robot will automatically start mopping.
EN
15
Publicité
