Connecting with the Dreamehome App
EN
1. Download the Dreamehome App
Scan the QR code on the robot, or search "Dreamehome" in the app store to
download and install the app.
QR Code
Note:
·
Only 2.4 GHz Wi-Fi is supported.
·
Due to upgrades in the app software, the actual operations may differ from
the directions in this manual. Please follow the instructions based on the
current app version.
12
2. Add Device
Open the Dreamehome app, tap "Scan QR code to connect" , and scan the same
QR code on the robot again to add the device. Please follow the prompts to finish
the Wi-Fi connection.
Note: If you want to reset Wi-Fi, repeat step 2 and then follow the prompts to
finish the Wi-Fi connection.
QR Code
Wi-Fi Indicator
· Blinking slowly:
To be connected
· Blinking quickly:
Connecting
· On: Connected