Selecting Programs Or Changing Parameters; Programming Baking Parameters - OEM TL 105 Mode D'emploi

5.4 - SELECTING PROGRAMS OR CHANGING
PARAMETERS (Fig. 4)
Turn knob (1) to the left to select the left icons, show-
ing a green square around them; press the knob (1)
to access the function, enable/disable the function or
change a value.
Turn the knob (1) to the right to select the right icons.

5.5 - PROGRAMMING BAKING PARAMETERS

The oven can be used in manual mode or by means of
three baking programs.
Turn the knob to the left to change:
Ceiling heating element power %
Baking temperature
Floor heating element power %
TIMER
Baking time
In order to edit one of these data (Fig.5), select the pa-
rameter to be changed by means of knob (1), then press
the knob: the parameter value changes colours (from
white to red), then turn the knob clockwise to increase
the value or counterclockwise to decrease the value.
When the desired value is reached, press the knob to
confirm the set value; the parameter changes colour
(from red to white).
For example, to change the baking temperature:
• Position on the value to be changed
• Press the knob (1); the value (3) will change colour
from white to red.
• Turn the knob (1) to change the value.
• Press the knob (1) again to confirm the value; the
value (3) will change colour from red to white.
EN - 22
A
(Fig. 2).
2
TL 105 - TL 108
1
1
3
Functioning
FIG. 4
FIG. 5
4