Publicité
9.5 Ordinary maintenance
9.5.1 Flue gas T-pipe maintenance
The flue gas T-pipe must be cleaned by removing
the appliance from its seat and vacuuming the
residues contained inside the T-pipe with an ash
vacuum cleaner.
• Open the door with the handle.
• Remove the safety bracket, by loosening the
two retaining screws.
A
• Pull the appliance out until it reaches the end
of the guides.
• Use an ash vacuum cleaner to remove debris
inside the T-pipe.
• Proceed in reverse order to reset the appliance.
004779216 - 18/09/2024
ITALIANO
ENGLISH
B
Fig. 54
Fig. 55
FRANÇAIS
9.5.2 Auger maintenance
In case the feed pipe that takes the pellets from
the hopper to the combustion chamber gets
clogged, proceed as follows:
• Remove the inspection plate catch (A).
• Remove the inspection plate (B).
B
A
• Remove the pellet residues inside the feed pipe
using a screwdriver.
The cleaning operation must only be performed
by qualified personnel.
DEUTSCH
ESPAÑOL
Fig. 56
Fig. 57
81
Publicité
