Publicité
3-3. Cutting Speed
Cutting speed is approximately 10 inches per minute at 0.88 in
(22 mm) mild steel thickness at max setting/tip saver mode.
3080 Model
2255 Model
Cutting speed is approximately 10 inches per minute at 0.75 in
(19 mm) mild steel thickness at max setting/tip saver mode.
The cutting speed curve shows the
recommended maximum cutting
speed capabilities of the power
source and torch for mild steel of
various thickness.
Y Exceeding
recommended
cutting speeds will cause
rapid erosion of the tip and
electrode.
191 831 / 191 830
OM-193 410 Page 13
Publicité
