Instructions On Correct Machine Use - Kunzle & Tasin Bona Scorpion Manuel D'utilisation

Prevention Measures for Users
Injury or damage may occur if the machine runs over the power
supply cable and it becomes damaged. Keep the cable away
from the lower part of the machine to avoid contact with the
abrasive. Always keep the power supply cable raised above the
machine.
Failure to comply with instructions on this machine and in this manual may cause serious injury and/or
damage. Read and comply with all safety instructions. Ensure that all plates, labels,
warnings and instructions are secured to the machine. New plates can be obtained from an authorized
Bona dealer.
Injury or damage may occur if maintenance operations or repairs are carried out by any unauthorized personnel.
The machine may become damaged if it is not kept in a dry building. Keep in a dry building.

Instructions on Correct Machine Use

Read this manual carefully and become familiar with
the machine.
The equipment is suitable for industrial use (e.g. in hotels,
schools, hospitals, offices, factories and shops).
1) Keep hands and clothes away from rotating parts.
2) Keep hands on the handle when the motor is operating.
3) DO NOT leave the machine unattended when the motor is
operating.
4) Always use the machine with the dust bag in the correct
position.
5) DO NOT detach the dust bag when the motor is operating.
6) Always disconnect the power supply cable from the
machine before performing maintenance.
The moving parts on this machine may cause serious injury
and/or damage. Keep hands, feet and loose clothing away from
all moving parts of the machine.
Performing maintenance or replacing the dust bag may cause
injury to the operator or people nearby if the machine is
connected to the power supply.
The following information highlights particularly hazardous
situations for the operator and/or machine. Understand when
these conditions may be present. Removing safety features
could cause death or physical injury. Take all steps necessary
to instruct personnel who may use the machine. Report any
damage on the machine or incorrect operation immediately.
7) Transport the machine with care due to the heavy weight of
the individual parts making up the machine.
8) Always use the machine in well-ventilated areas.
9) Always keep the work area well-lit.
10) Always dispose of the sawdust appropriately.
11) Use the type and amount of abrasive specified in the
instruction manual.
12) The use of accessories other than those recommended in
this manual may cause injury.
13) The machine is for indoor use only.
Bona Scorpion Manual
13 13
EN