SilverCrest SDR 1.5 A1 Mode D'emploi page 59

9.12.5 Setting the date format
To set the date format, proceed as follows:
 Press and hold the INFO / MENU button (2) for approx. 2 seconds.
 In the System menu, use the I◂◂ (6) and ▸▸I (7) buttons to select the "Time"
option.
 Press the OK / AMS button (8) briefly.
 Use the I◂◂ (6) and ▸▸I (7) buttons to select the "Set date format" option.
 Press the OK / AMS button (8) briefly.
 Use the I◂◂ (6) and ▸▸I (7) buttons to select "DD-MM-YYYY" or "MM-DD-
YYYY" and confirm your selection by pressing the OK / AMS button (8)
briefly.
9.12.6 Setting the display brightness
To adjust the display brightness, proceed as follows:
 Press and hold the INFO / MENU button (2) for approx. 2 seconds.
 In the System menu, use the I◂◂ (6) and ▸▸I (7) buttons to select the
"Backlight" option.
 Press the OK / AMS button (8) briefly.
 Use the I◂◂ (6) and ▸▸I buttons (7) to select "High", "Medium", "Low" or
"Off" and confirm your selection by pressing the OK / AMS button (8)
briefly.
9.12.7 Automatic display power-off
You can switch the automatic power-off of the display (3) on or off here.
 Press and hold the INFO / MENU button (2) for approx. 2 seconds.
 In the System menu, use the I◂◂ (6) and ▸▸I (7) buttons to select the "Auto
lighting" option.
 Press the OK / AMS button (8) briefly.
SilverCrest SDR 1.5 A1
English - 57