Publicité
SilverCrest SDR 1.5 A1
8.2 Using the power adapter
In order to power the device with a USB power adapter (5 V
supplied), connect the USB cable (C) supplied to the micro USB connection
(13) on the digital radio and a free USB port on your USB power adapter.
If the digital radio is disconnected from the power, various
settings (e.g. date and time) are lost. You can insert additional
batteries to prevent this. Batteries cannot be recharged in the
digital radio.
9. Commissioning and operation
9.1 Setting up the telescopic aerial (12)
To guarantee optimum radio reception, extend the telescopic aerial (12) to its
full length. The telescopic aerial (12) can be rotated. This lets you optimise the
radio reception.
9.2 Switching the digital radio on and off
Switch the digital radio on by pressing and holding the
approx. 3 seconds.
When the time and date are shown on the display (3), you can
switch the digital radio on by briefly pressing the
(5).
When you first start it, the digital radio starts up in DAB mode
and automatically scans for and saves all available DAB
stations.
In battery mode, the display (3) shows the charge level of the
batteries with a battery icon. Replace the batteries when they
are empty.
46 - English
, 500 mA, not
button (5) for
button
Publicité
