Publicité
SilverCrest SDR 1.5 A1
9.11.2 Automatic tuning
Start automatic tuning by pressing the OK / AMS button (8) and holding it
down for about 2 seconds. With this function, any stations found are saved
automatically.
The unit only scans for DAB or for FM stations, depending on
the mode selected.
9.11.3 Manual tuning
This function allows you to search for a channel without automatically saving it.
Press and hold the I◂◂ (6) or ▸▸I (7) button for approx. 2 seconds to launch
the station scan in the selected direction. The scan stops when the next
station is found.
9.11.4 Manually tuning a station
Besides the automatic station search, you can also tune in a station manually.
This allows you to also tune-in any weaker stations. Proceed as follows:
Press the FAV / SEARCH button (11) briefly.
Briefly press the I◂◂ (6) or ▸▸I (7) button to increase or reduce the frequency
one step (0.05 MHz).
9.11.5 Recalling a saved station
You can recall stations you have saved as follows:
Use the I◂◂ (6) and ▸▸I (7) buttons to toggle between the saved stations.
9.11.6 Audio setting
You can set the playback in FM Radio mode to "Stereo" or "Mono". Please
note that stereo sound is only available if headphones are connected.
Press and hold the INFO / MENU button (2) for approx. 2 seconds.
Use the I◂◂ (6) and ▸▸I (7) buttons to select the "Audio setting" option.
Press the OK / AMS button (8) briefly.
52 - English
Publicité
