Publicité
The appliance was designed to be used within the temperature and humidity ranges indicated in
Table 2 (Technical data - Section 9). Use of the appliance at a temperature and/or humidity level
outside the specified range can result in unexpected operational anomalies and faults.
ATTENTION! The appliance is not suitable for use in environments such as phar-
macies, hospitals, analysis laboratories, etc., i.e. in all those applications that re-
quire dual temperature control, power supply alarms, and recording temperature
variation over time.
No modifications should be made to the appliance without the manufacturer's prior approval in
order to avoid any risks to objects or individuals and to ensure optimum performance. Any modifi-
cation made to the appliance will result in the immediate cancellation of the warranty and any re-
sponsibility by the manufacturer. The appliance must only be used when there are no doubts re-
garding its technical status.
2.3 Technical data
Refer to Table 1 - Section 9 for data regarding power, electrical power supply, dimensions, overall
dimensions, etc.
2.4 Parts of the appliance (Pic.1/2/3 - Section 8)
Control panel (Pic.3 - Section 8)
The temperature inside the appliance can be adjusted (all models) by means of the buttons on the
digital control unit. Refer to Section 5 (Installation and operation of appliance) for information on
setting the temperature and programming the digital control unit.
Support racks
The height of the racks can be freely adjusted to accommodate products of different heights. Pro-
ceed as follows to modify the height:
Remove the rack;
Position the rack support guides in the desired position;
Place the rack back onto the support guides.
Wheel kit (optional on all models)
Instead of the standard legs, a wheel kit is available as an option. Four wheels are supplied: two with
brakes (front wheels) and two without brakes (rear wheels).
Proceed as follows to mount the wheels:
Lift the refrigerator while keeping it in an upright position. Do not tilt or lay it on its side.
Remove the bolts holding the legs and mount the wheels in their place, making sure that the wheels
with the brakes are mounted in the front of the appliance (door side).
2.5 Accessories included
The appliance comes standard equipped with the following accessories:
AKT690 (all models): 3 pair of guides and 3 shelves;
AKT1490 (all models): 6 pair of guides and 6 shelves.
2.6 Protection devices present on the appliance
The appliance is equipped with the following safety protection devices:
Protective grille for the technical compartment fans which prevents the users from touching
moving parts during normal operation of the appliance.
It is strictly forbidden to remove, modify or deactivate any safety /protection device
on the appliance.
TRANSLATION OF THE ITALIAN ORIGINAL INSTRUCTIONS
- 21 -
Publicité
