Publicité
Hotwire Anemometer / English
5. Changing Setup Options
Use Setup to change area unit, flow area, sleep mode settings. The thermometer stores the settings in its
memory.
Setup Options
Option
Menu item
Chose area unit
Unit
Change the flow area
area
Auto Power Off mode
SLP
Entering or Exiting Setup
When the thermometer is in Setup mode, the display shows SETUP.
Press "Setup " button for 3 seconds start or exit Setup.
Changing a Setup Option
• Press "Unit " or "Unit " to scroll to the setup option you want to change.
• Press "Enter" to indicate that you want to change this setting.
• Press "Unit " or "Unit " until the setting you want to use appears on the display.
• Press "Enter" to store the new setting in memory.
Notes: Setup is disabled in MIN MAX, Mean mode.
Area unit Setting
• When the thermometer is in Setup mode, press "Unit " or "Unit " to scroll to the area unit setup
option (refer Fig.2).
• Press "Enter" button., The string "AREA" and area unit shows in the screen.
• Press "Unit " or "Unit " to scroll to unit that you want to change((refer Fig.3).
• Press "Enter" to store the new area in memory.
4
All manuals and user guides at all-guides.com
Settings
set area unit
set area of measuring air flow auto off or on
Area Setting
Changing the number digits of area and Change the number value of area. Press "Unit " or "Unit " to
scroll to the area value setup option when the thermometer is in the setup mode. Press "Enter" button, the
area number flashes. Press "Unit " or "Unit " to scroll to digit that you want to change (refer Fig.3).
Press "Enter" t, the screen indicate that area number with a flashing digit. Press "Unit " or "Unit " to
change the flashing digit from 0 to 9. Press "Mean" to change the station of flashing digit and press "Unit
" or "Unit " to change the number, the adjust order is from right to left. Press "Enter" to store the
new area in memory.
Auto Power Off Mode
The thermometer enters sleep mode (default). That is to say, the meter will automatically shut off after 20
minutes if no button press occurs for 20 minutes.
When the thermometer is in Setup mode, the display shows SETUP. Press "Unit " or "Unit " to scroll
to the "SLP" page. Press "Enter" to indicate "On" or "OFF". Press "Unit " or "Unit " until the setting
you want to use appears on the display. Press "Enter" to store the new setting in memory. On (sleep mode
on)or 0FF (sleep mode off).
Hotwire Anemometer / English
5
Publicité
