Checklist When Data Is Missing On The Display - ADE WS 2132 Mode D'emploi

From now on, the weather station automatically
switches to receiving-mode multiple times each night.
During this process, the displayed time is compared
with that received from the time signal transmitter and,
if necessary, corrected.
If no sufficiently strong signal has been received,
the base station aborts the receiving process after a
few minutes and the radio-tower symbol goes out.
The receiving process is started again at a later point in
time.
In this case, the time proceeds as usual (beginning with
the start time of "00:00").
Checklist when data is missing on the
display
No data display from the time signal transmitter
1. Check whether the location of the base station
is suitable; see "Choosing a location".
2. Manually restart the receiving process, see
"Starting signal reception manually".
3. Wait until the base station automatically
switches back to reception at a later time. The
reception is usually better at night.
4. Make settings manually if reception is not
possible at your location; see "Setting the time
and date manually".
Weather station with ventilation recommendation WS 2132 53