ADE WS 2132 Mode D'emploi page 72

Fault
Temperature indication
for the outdoor sensor
appears too high.
The display shows "H.HH"
or "LL.L" instead of the
measured values.
Display is illegible,
function is unclear or
values are obviously
incorrect.
Weather station with ventilation recommendation WS 2132
72
Possible cause
‚ Check whether the
sensor is exposed to
direct sunlight.
‚ The values lie
above or below the
measurement range.
Reset the weather station
to the delivery state.
1. Remove the batteries
from the outdoor
sensor and the base
station.
2. Wait a moment.
3. Proceed as described
in "Start-up".